Material Data Center is a leading international information system for the plastics industry. Material Data Center offers a comprehensive plastics database, calculation tools, CAE interfaces, a literature database and an application database. For more information about Material Data Center visit www.materialdatacenter.com.

This is the free Material Data Center Datasheet of RADILON D RV300RG 3900 BK - PA610-GF30 - RadiciGroup High Performance Polymers

Check here, which other Radilon D datasheets, application examples or technical articles are available in Material Data Center

加工/物理特性 - 机械性能 - 热性能 - 电性能 - 其它性能 - 函数

Any use of this information falls under the rules of our disclaimer.

材料文字说明

PA610 30% glass fibre reinforced injection moulding grade. Heat stabilized, very high hydrolysis resistance. Black colour.

Suitable for parts requiring good dimensional stability and mechanical resistance. Excellent retention of properties in contact with automotive cooling circuit liquids. This grade is partially renewably-sourced (64% of base polymer by weight).

加工/物理特性	干 / 已调节	单位	Test Standard
ISO数据
模塑收缩率, 平行	0.4 / *	%	ISO 294-4, 2577
模塑收缩率, 垂直	0.8 / *	%	ISO 294-4, 2577

机械性能	干 / 已调节	单位	Test Standard
ISO数据
拉伸模量	8500 / 6800	MPa	ISO 527
断裂应力	150 / 120	MPa	ISO 527
断裂伸长率	5 / 6	%	ISO 527
无缺口简支梁冲击强度, +23°C	100 / 105	kJ/m²	ISO 179/1eU
简支梁冲击强度, -30°C	105 / -	kJ/m²	ISO 179/1eU
简支梁缺口冲击强度, +23°C	15 / 17	kJ/m²	ISO 179/1eA
简支梁缺口冲击强度, -30°C	12 / -	kJ/m²	ISO 179/1eA

热性能	干 / 已调节	单位	Test Standard
ISO数据
熔融温度, 10°C/min	222 / *	°C	ISO 11357-1/-3
热变形温度, 1.80 MPa	200 / *	°C	ISO 75-1/-2
厚度为h时的燃烧性	HB / *	class	IEC 60695-11-10
测试用试样的厚度	0.8 / *	mm	-

电性能	干 / 已调节	单位	Test Standard
ISO数据
体积电阻率	1E13 / 1E11	Ohm*m	IEC 62631-3-1
表面电阻率	* / 1E10	Ohm	IEC 62631-3-2

其它性能	干 / 已调节	单位	Test Standard
吸水性	2.2 / *	%	类似ISO 62
吸湿性	1 / *	%	类似ISO 62
密度	1310 / -	kg/m³	ISO 1183
Biobased content	60	%	-

函数

典型数据

加工方法

注塑

供货形式

碎粒料, 黑色

添加剂

脱模助剂

特殊性能

经热稳处理的/耐热的

耐化学试剂

水解稳定

Certifications

生物相容

应用

汽车

地区供应

北美, 欧洲, 亚太, 中南美洲, 中东/非洲

其他信息

注塑成型

该材料用防水包装运输，已经为后续加工准备好。最合适的加工含水量最大值推荐为0.1%。除湿干燥机的典型条件：温度80°C，露点-20°C或更低，时间2-4h或更多。注意避免材料吸水以及添加再粉碎材料时混入其他聚合物的污染。颜色变化及机械性能下降可能会发生，需要仔细监控。

注塑, 加工参数

熔融温度	模具温度	注塑速
240 - 260°C	80 - 90°C	高

权利义务的法律声明

Copyright Altair Engineering GmbH. Altair Engineering GmbH assumes no liability for the system to be free of errors. The user takes sole responsibility for the use of this data under the exclusion of every liability from Altair Engineering GmbH; this is especially valid for claims of compensation resulting from consequential damages. Altair explicitly points out that any decision about the application of materials must be double checked with the producer of this material. This includes all contents of this system. Copyright laws are applicable for the content of this system.

Created: Source: www.materialdatacenter.com

Material Data Center is provided by M-Base Engineering + Software GmbH. M-Base Engineering + Software GmbH assumes no liability for the system to be free of errors. Any decision about the application of materials must be double checked with the producer of this material.

Additional information about this material, like producer contact address, etc. can be found at www.materialdatacenter.com. For access to this extra information a registration is requested. Free online registration is available.